IATA Pretest

DGI Training

Air (IATA) Recurrent Training Pre-Test
 

This practice test is a sampling of subject matter to be reviewed during the IATA 1-Day Recurrent Course. Should you struggle with the pretest it is strongly recommended that you attend the IATA 2-Day Initial Class.

1. Answer the following questions regarding a shipment of: "Varnish" packing group II, quantity 1L, packed into a non specification fibreboard box.

a. What is the Proper Shipping Name:

b. How much is allowed per package? 

c. What subrisk label must be applied?

d. Are there any special provisions? 

2. Chemical X displays the following properties: Flashpoint = 15° C (cc) Boiling point = 45° C

a. What is the primary hazard?

b. What is the subsidiary hazard?

3. A UN 4D box must use plywood that is at least 2-ply.

4. What are the four basic marks required for most packages? (select all four)

5. The CAO label is used on all packages loaded onto a Cargo Aircraft.

6. All inner packagings containing liquid must have closures held in place by secondary means or be packed in a leakproof liner and then placed in the outer packaging. 

7. The net or gross amount of dangerous goods must be written on all packages of dangerous goods.

8. May 1 kg if Sodium bromate be shipped as an excepted quantity? 

9. Do Hazard classes 9 and 6.1 require segregation?

10. Compute the "Q" value for the following three chemicals: They will be shipped in a 4G fibreboard box, passenger aircraft. 

1. UN 1190   PG II   1 L 
2. UN 1193   PG II   1.5 L
3. UN 1789   PG II   .5 L

Can these items in Question 10 be shipped in the same outside package?